Cladding
Available now
Outdoor WPC Wall Cladding
Hidden-bracket cladding system, brackets included
New-composite WPC cladding with a 0.8mm UV layer and a stainless steel hidden bracket system supplied in every order, no visible fasteners, no stress cracking, no extra hardware to source.
Available colours
- Warranty
- 12 years
- Origin
- Manufactured to Teak & Rope specification
Overview
The reasoning behind the spec.
Outdoor WPC Wall Cladding is the only board in its category that ships with a complete stainless steel hidden bracket system included. Most competitors have you screw directly through the board face, over 2-5 years of Australian heat cycles those screw holes become stress points, the timber expands and contracts, and the facade cracks and loosens. Our bracket system holds the board without penetrating it, distributing load across the full length so there are no failure points, no visible fasteners and no specification burden hunting for compatible hardware. The board itself uses the same 0.8mm UV-stabilised outer layer and new virgin composite core as our decking, with a fully waterproof and fireproof body. No bushfire compliance certificate is required for decorative facade use.
What sets it apart
Engineered details.
Stainless steel hidden brackets included
Every order ships with the complete fixing system, no additional hardware cost, no specification hunt.
No stress cracking
Bracket holds the board without penetrating it. Direct-screw competitors crack at the screw hole as boards expand and contract.
Zero visible fasteners
Clean architectural facade from every angle, the system is invisible once installed.
No bushfire cert needed
Not required for decorative facade application, shorter spec pathway than timber alternatives.
Performance
Tested. Rated. Documented.
Every metric below is independently verified. Full test reports and BAL compliance pathways are available with the technical data sheet.
Technical Specification
- Composition
- New virgin WPC composite
- UV layer
- 0.8 mm UV-stabilised
- Fixing system
- Stainless steel hidden brackets included
- Visible fasteners
- None
- Fire rating
- Fireproof
- Water rating
- Fully waterproof
- Compliance
- No bushfire certificate required for decorative facade use
- Colours
- Grey / Momentum, Maple, Black, Pure White, Cream / Off-White
Warranty
12 year warranty. Refer to current product data sheet.
Lead time
Stocked in 5 colours, typically 5 business days for trade quantities.
Origin
Manufactured to Teak & Rope specification, supplied wholesale across Australia.
Certifications
- Waterproof
- Fireproof
- Commercial-grade UV
In situ
As built, not rendered.
Selected frames from completed Australian projects featuring this profile.
Finishes
5 factory finishes.
Custom colour matching available on project quantities of 80sqm and above. All finishes are low VOC and certified for indoor air quality.
Grey / Momentum
Mid-tone architectural grey, the most-specified neutral for contemporary facades.
Maple
Warm light timber tone, soft and residential in character.
Black
Deep matte black for high-contrast modernist facades.
Pure White
Bright clean white, striking on rendered or stone bases.
Cream / Off-White
Warm off-white, softer than pure white, pairs with natural stone and timber.
Installation
Detailed for the people who build.
Every order ships with our installation guide, fixing schedule and toolbox talk pack. Site visits available on request across the eastern seaboard.
Book a Site Walk- 01
Battens
Vertical battens at 600mm centres on a breathable wall membrane.
- 02
Brackets
Fix stainless steel hidden brackets to each batten at specified centres, included in every order.
- 03
Boards
Slot boards down into brackets, no penetrations, no visible fasteners.
- 04
Trims
Matching corner and reveal trims supplied to suit, in the same colour palette.
Typical applications
Where it performs.
Specified across these typologies by Australian architects and developers.
The comparison
How Outdoor WPC Wall Cladding measures up.
A direct, like-for-like specification read against the typical alternatives on the Australian market.
Teak & Rope
Specification- Stainless steel hidden brackets included in every order, no additional hardware cost
- Hidden bracket system, zero visible fasteners, clean facade finish
- Bracket holds the board without stress points, no splitting or movement over time
- 0.8mm UV-stabilised outer layer, commercial-grade fade protection
- New composite at a proprietary ratio, sturdy, dense, consistent
- Fully waterproof and fireproof
- No bushfire compliance certificate required for decorative facade use
- 5 colours: Grey / Momentum, Maple, Black, Pure White, Cream / Off-White
Typical alternatives
Market- Direct screw through the board face, screws become visible and cause stress cracking over time
- Direct screwing creates a fixed stress point, cracking propagates from the screw hole as boards expand and contract
- Brackets usually sold separately, additional cost and specification burden
- 0.3mm UV coating on recycled cores, fade and colour shift in 1 to 2 seasons
- Often requires a certified installer to meet facade requirements
Why it matters
Every cladding board carries weight, its own plus wind load plus thermal movement. Direct screwing into the board face concentrates that stress at a single point. Over 2 to 5 years in Australian summer and winter cycles, screw holes become failure points. The stainless steel hidden bracket system distributes load across the full board length, no penetrations, no stress cracking, no movement.
FAQs
The questions we hear most.
Specify Outdoor WPC Wall Cladding on your next project.
Order an A4 sample pack, request a project quote, or arrange a meeting with our specification team.